Logo for Tectonic Engineering
NJT Portal Bridge North Project
  • New Jersey Transit (NJT) / Perini Contractors
  • Kearny and Secaucus, Hudson County, NJ
  • 2013 - 2016
  • 1,600,000,000

The existing, 111-year-old Portal Bridge was built by the Pennsylvania Railroad and entered revenue service in November 1910. Prior to the COVID-19 pandemic, the bridge carried more than 450 daily Amtrak and NJ TRANSIT trains and 200,000 daily passengers over the Hackensack. This two-track, moveable swing span is a major bottleneck and source of delays, particularly when the aging bridge malfunctions during opening and closing for maritime traffic.

Tectonic is providing Quality Control (QC) Inspections, Third-Party Materials Testing, and Drilled Shaft Integrity Testing for NJ Transit Contract 20-083X, Portal Bridge North. Tectonic provided these services the following various disciplines and the scope of work that they entail:

Signals

  • Signal Bridges (Foundations and Superstructure)
  • Cable Trough System – Integral with Structures
  • Signal Bungalow Support Structure (Bump Out or Ground)
  • Housing Compound Fencing
  • Local Conduit / Cable

Communications

  • Communications Equipment
  • Communications Cabling – Fiber and Copper
  • Communications Shelter Cabling
  • Communications Shelters – with equipment
  • Drilling
  • Shelter Grounding
  • Shelter Battery Plant

Traction Power

  • Switch Heater Unit Substations (Complete)
  • Switch Heater Distribution + Cabling – HV & Main 480V feeders
  • Switch Heater Distribution and Cabling – Locals
  • Signal Power Transformers – 100Hz and 25Hz
  • Underground Signal Power Conduit / Cabling
  • Aerial Signal Power Cabling
  • SCADA RTU Equipment Housings (Complete)
  • 60Hz Power Equipment
  • 60Hz Power Cabling
  • Local Utility Electrical Services
  • Interlocking Lighting – Complete
  • Motor Operated Disconnect Switch control cabling and raceway
  • Traction Power System Related Conduit Systems

Track

  • Welded Track Installation Complete
  • Welded Turnout Installation
  • Bridge Guard Rail
  • Additional Ballast
  • Bonded Insulated Joints
  • Additional Welds

Demolition

  • Structural Steel Demolition and Removal
  • Fender System Demolition and Removal
  • Miter Rails
  • Signal System Removal – Cables, Bungalows
  • Electric Traction Power System Removal
  • Trackwork System Removal – Rails, Ties, OTM
  • Catenary System Removal – Catenary Poles
  • Catenary System Removal – Cat Pole and Down Guy Foundations
  • Existing Decommissioned Catenary System Removal
Become a prequalified vendor

Become a prequalified vendor

INSTRUCTIONS

Companies interested in providing professional services or construction services to Tectonic must be prequalified. Firms that provide products or other services are not required to be prequalified.

  • Thank you for your interest in doing business with Tectonic:
  • Please answer all questions and provide all requested information. If a question is not applicable, indicate as “N/A” and provide an explanation if necessary.
  • Supplemental information sheets should be used to provide additional information that does not fit on the form.
  • Clearly indicate at the top of the supplemental information sheet which section of the questionnaire it references.
  • After the questionnaire is fully reviewed for completeness, please click on the “Submit” button.
  • Any questions regarding this form can be sent to prequal@tectonicengineering.com.

GENERAL

Maximum file size: 33.55MB

Upload a copy of your certificate(s) and/or screenshot(s) verifying the above reported status. * If you do not have any verifications, please be sure to check the box above for None or Not Applicable*

PRIMARY (CORPORATE) OFFICE INFORMATION

(Use this format: mm-dd-yyyy)

PRIMARY CONTACT

SECONDARY CONTACT

CLAIMS CONTACT

OFFICERS

.

STOCKHOLDERS

(include only those owning 5% of more of stock. Attach a supplemental sheet if needed.)
plus1 Add minus1 Remove

COLLECTIVE BARGAINING AGREEMENTS

(Identify union affiliations)
Do you have experience with projects that require Certified Payroll and Davis Bacon Wage Rates?

SERVICE CAPABILITIES

.
plus1 Add minus1 Remove

SERVICES PROVIDED

(Select all services that apply)

Maximum file size: 5MB

STAFFING

.

OFFICE LOCATIONS & REGIONS SERVED

(Including primary office)
plus1 Add minus1 Remove


LITIGATION / CONTRACT DISPUTES

List any judments, arbitrations, liens, insurance claims, or lawsuits the firm has been subject to within the past 5 years. If there are none, respond by saying there were none.

Maximum file size: 5MB

CRIMINAL BACKGROUND INFORMATION

Has the firm, any affiliate, or any of the current or former principal owners, stockholders, or officers or managerial employees:

Insurance Coverage

State your standard coverage limits in COLUMN 2 below.

POLICY

Occurrence (or claim) limit

Aggregate limit

GCL

Auto

Umbrella / Excess

Pollution / Liability

Workers Compensation

Professional Liability

Cyber / Network Security Liability


Health & Safety

Maximum file size: 33.55MB

Health & Safety (Cont.)

If Yes, does the training include:

Health & Safety (Cont.)

Health & Safety (Cont.)

Provide the following information for the last 3 years. You must respond to all questions even if your firm is not required to maintain OSHA logs.

  YEAR (most recent 3 years)

  Current Year

  Prior Year

  Prior Year

Worker's Compensation
Experience Modification Rate (EMR)


Number of Fatalities
(list any, explain in Supplemental Information field at the end of this form.)


Lost Work Day Incident Rate
(total lost-time recordable cases x 200,000 / total hours worked.)


OSHA Recordable Incident Rate
(total OSHA recordable cases x 200,000 / total hours worked)


Total Number of Hours Worked
(per occurrence)


The following upload fields allow for uploading of multiple files.
  1. To upload multiple files please click-and-hold the CTRL key and left-click with your mouse.
  2. Once you have selected the file(s) hit the "Open" button on the the dialog box.

Maximum file size: 10MB

Sending

Special Inspection Feedback Form

Special Inspection Feedback Form

Section

1 = Not reliable and 10 = Very reliable
1 = Not well and 10 = Extremely well
1 = Not Satisfied and 10 = Extremely Satisfied
1 = Not satisfied and 10 = Very satisfied

Section

1 = Not Satisfied and 10 = Very Satisfied
1 = Not Satisfied and 10 = Very Satisfied
1 = Not Satisfied and 10 = Very Satisfied
1 = Not Satisfied and 10 = Very Satisfied

Section

(Please fill only if you answered "Yes" in the previous question)
Sending

Service Evaluation

Service Evaluation

Section

Your name
The company you're working with
A contact phone number if you would like to be contacted (In this format XXX-XXX-XXXX)
Feel free to express your views of TECTONIC service.
Sending

Enter your search criteria below: