Project Management Consultant (PMC) Services for the Rehabilitation of 10 MTA New York City Transit Subway Stations under 3
  • MTA Construction & Development / NYCT
  • New York, NY
  • 2022 – 2025
  • 200,000,000

Under this assignment (MTA C&D’s Consultant Construction Management Contract 1633, Task Order #6), Tectonic is providing Program Management, Design Compliance, and Construction Compliance services for the following design-bid-build construction contracts, which are all focused on achieving state of good repair at both above-ground and below-ground stations on three separate subway lines on the MTA New York City Transit (NYCT) system:

Package A: Station Rehabilitation at 3 locations on the Jamaica Line (A-35305): Consists of three Stations: 75th St, 85th St and Cypress Hills, under construction contract A-35305. The scope for this package includes rehabilitation or replacement of various structural and architectural elements as a part of station renewal to achieve a State of Good Repair (SOGR). Major elements of the project include, but are not limited to the following:

  • Structural steel repairs of elements such as track stringers, floor beams, repair of top flange of thru-span girders and other supporting members within mezzanine and platform areas at all 3 stations.
  •  Concrete spall and crack repair, concrete toping at ADA boarding areas, platform edge and rubbing board replacements.
  •  Replacement of electrical components and fixtures on the platform, mezzanine, and stairs, including various conduits.
  •  Windscreen replacements.
  •  Replacement of street, mezzanine, and platform stairs and any impacted sidewalk areas.
  •  Installation of PSLAN at 75th St. station.
  •  Tile work and substrate repair.
  •  Surface cleaning & painting.


Package B: Station Rehabilitation at 5 Locations on Broadway/7th Avenue Line (A-37217): Consists of five Stations: 191st St, 145th St, 86th St, 79th St & 50th St under contract A-37217. The scope for this package includes various component repairs to achieve SOGR. Major elements of the project include, but are not limited to the following:

  •  Concrete spall and crack repair.
  •  Structural steel repairs (column & beams).
  •  Repairs to plaster and architectural arches.
  • Concrete toping for ADA boarding areas, replacement of platform edge and rubbing board.
  • Tile work and substrate repair.
  • Surface cleaning & painting.
  • Track system replacement (ties, running rail, etc.).


Package C: Platform Component Repairs at 2 Locations on the Queens Boulevard Line (A-36986): Consists of two Stations 36th & 46th St under contract A-36986. The scope for this package includes component repairs to achieve SOGR. Major elements of the project include, but are not limited to the following:

  • Platform repairs and betterments such as installation of concrete toppings to create new ADA boarding areas, replacement of platform edges, and installation of new rubbing boards.
  • Structural steel repair at column bases and beams.
  • Concrete spall and crack repair.
  • Tile work and substrate repair.
  • Surface cleaning & painting.
  • Drainage work.
  • Doors, frames, and gate replacement.

Select a Prequalification form...

The information helps Tectonic evaluate a vendor’s service capabilities, the volume of work the vendor can readily handle, insurance coverages, as well as health and safety information.

Prequalified vendors will have their purchase orders expedited and will be recommended for future work that falls within that firm’s service capabilities.

Online
PDF
Become a prequalified vendor

Become a prequalified vendor

INSTRUCTIONS

Companies interested in providing professional services or construction services to Tectonic must be prequalified. Firms that provide products or other services are not required to be prequalified.

  • Thank you for your interest in doing business with Tectonic:
  • Please answer all questions and provide all requested information. If a question is not applicable, indicate as “N/A” and provide an explanation if necessary.
  • Supplemental information sheets should be used to provide additional information that does not fit on the form.
  • Clearly indicate at the top of the supplemental information sheet which section of the questionnaire it references.
  • After the questionnaire is fully reviewed for completeness, please click on the “Submit” button.
  • Any questions regarding this form can be sent to prequal@tectonicengineering.com.

GENERAL

Maximum file size: 134.22MB

Upload a copy of your certificate(s) and/or screenshot(s) verifying the above reported status. * If you do not have any verifications, please be sure to check the box above for None or Not Applicable*

PRIMARY (CORPORATE) OFFICE INFORMATION

(Use this format: mm-dd-yyyy)

PRIMARY CONTACT

SECONDARY CONTACT

CLAIMS CONTACT

OFFICERS

.

STOCKHOLDERS

(include only those owning 5% of more of stock. Attach a supplemental sheet if needed.)
plus1 Add minus1 Remove

COLLECTIVE BARGAINING AGREEMENTS

(Identify union affiliations)
Do you have experience with projects that require Certified Payroll and Davis Bacon Wage Rate?

SERVICE CAPABILITIES

.
plus1 Add minus1 Remove

SERVICES PROVIDED

(Select all services that apply)

Maximum file size: 5MB

STAFFING

.

OFFICE LOCATIONS & REGIONS SERVED

(Including primary office)
plus1 Add minus1 Remove


LITIGATION / CONTRACT DISPUTES

List any judments, arbitrations, liens, insurance claims, or lawsuits the firm has been subject to within the past 5 years. If there are none, respond by saying there were none.

Maximum file size: 5MB

CRIMINAL BACKGROUND INFORMATION

Has the firm, any affiliate, or any of the current or former principal owners, stockholders, or officers or managerial employees:

Insurance Coverage

State your standard coverage limits in COLUMN 2 below.

POLICY

Occurrence (or claim) limit

Aggregate limit

GCL

Auto

Umbrella / Excess

Pollution / Liability

Workers Compensation

Professional Liability

Cyber / Network Security Liability


Health & Safety

Maximum file size: 134.22MB

Health & Safety (Cont.)

If Yes, does the training include:

Health & Safety (Cont.)

Health & Safety (Cont.)

Provide the following information for the last 3 years. You must respond to all questions even if your firm is not required to maintain OSHA logs.

  YEAR (most recent 3 years)

  Current Year

  Prior Year

  Prior Year

Worker's Compensation
Experience Modification Rate (EMR)


Number of Fatalities
(list any, explain in Supplemental Information field at the end of this form.)


Lost Work Day Incident Rate
(total lost-time recordable cases x 200,000 / total hours worked.)


OSHA Recordable Incident Rate
(total OSHA recordable cases x 200,000 / total hours worked)


Total Number of Hours Worked
(per occurrence)


The following upload fields allow for uploading of multiple files.
  1. To upload multiple files please click-and-hold the CTRL key and left-click with your mouse.
  2. Once you have selected the file(s) hit the "Open" button on the the dialog box.

Maximum file size: 10MB

Sending

Special Inspection Feedback Form

Special Inspection Feedback Form

Section

1 = Not reliable and 10 = Very reliable
1 = Not well and 10 = Extremely well
1 = Not Satisfied and 10 = Extremely Satisfied
1 = Not satisfied and 10 = Very satisfied

Section

1 = Not Satisfied and 10 = Very Satisfied
1 = Not Satisfied and 10 = Very Satisfied
1 = Not Satisfied and 10 = Very Satisfied
1 = Not Satisfied and 10 = Very Satisfied

Section

(Please fill only if you answered "Yes" in the previous question)
Please verify your input by checking the box below.
Sending

Service Evaluation

Service Evaluation

Section

Your name
The company you're working with
A contact phone number if you would like to be contacted (In this format XXX-XXX-XXXX)
Feel free to express your views of TECTONIC service.
Please verify your input by checking the box below.
Sending

Enter your search criteria below: